Original version 12/, Revised 1/, 3/, 3/
If you are looking for more details, kindly visit titanfine.
Note: For the purpose of this Fact Sheet, the term "disposable nitrile gloves" refers to gloves that are one-time use and have a thickness of 5-mil and less. Examples are given in the tables at the end of the fact sheet.
Nitrile is a synthetic rubber material that offers chemical and abrasion resistance and is a very good general-duty material for gloves.
Thin, disposable, nitrile gloves are the most common gloves used when handling chemicals in laboratories; however, it is important to remember that thin nitrile rubber provides only limited chemical protection. These gloves are intended to be used only as a physical barrier against brief contact with chemicals, and they need to be removed and discarded immediately after they become contaminated.
Glove materials are evaluated on three criteria when exposed to chemicals:
It is important to remember that laboratory testing data does not take into account the effects of hand movement and body temperature. The actual protection will be less for a glove that is being worn and stressed during use.
Glove thickness is usually given in the unit mils, which is equal to one one-thousandth of an inch; therefore, a glove that is 10 mil, is 0.010 inches thick. A thicker gauge glove will provide more protection than a thinner glove of the same material, but often at the expense of touch-sensitivity and dexterity.
Double-gloving can be used to increase the total breakthrough time of a particular glove, but this increases hand fatigue and overheating and is recommended only for short-duration tasks.
A glove that is too small for your hand will be over-stretched, which stresses the material and makes it less protective. A glove that is too large may compromise dexterity and may also become more easily damaged during use. Use the manufacturer's size chart to choose an appropriate fit.
Glove removal (or "doffing") must be done carefully to avoid contact with the outside of the glove. Always wash your hands after disposing of the gloves.
Soiled gloves can contaminate objects and surfaces, later exposing you to chemical hazards. When this occurs, you can unknowingly be exposed to chemical hazards. If you do experience an acute health effect, it can be difficult to determine which chemical was the source of the exposure.
Reduce the likelihood of cross contamination by:
Do not wear gloves in hallways, offices, break rooms, elevators, restrooms, or any other public areas!
In addition to their superior chemical resistance profile, another reason that nitrile gloves are used instead of latex in Penn research labs is to avoid the skin allergies that can be caused by the proteins in the latex rubber. It is possible, however, for some individuals to be sensitive to the accelerators (chemical additives) in nitrile.
Accelerator-free nitrile glove products are available for people who have sensitivity to standard nitrile gloves. One example is pictured here: Hourglass International™ HandPRO™ FreeStyle Nitrile Exam Gloves
Nitrile gloves are made from a synthetic rubber material called nitrile butadiene. Unlike latex gloves, which come from natural rubber, nitrile gloves are synthetic, making them ideal for those with latex allergies. The critical advantage of nitrile is its resistance to punctures, chemicals, and oils, giving it a broader range of uses across industries than vinyl or latex.
Nitrile gloves were first developed in the s to solve the rising cases of latex allergies. Since then, they have gained popularity due to their superior chemical and puncture resistance. Today, nitrile gloves are a staple in healthcare, food service, and many other industries where hand protection is vital.
Nitrile gloves are widely used across multiple industries due to their durability, puncture resistance, and chemical protection. These gloves offer an excellent alternative to latex, especially for those with allergies, making them the go-to choice for professionals who require reliable hand protection in their work environments. Here’s a breakdown of some of the key industries and professionals that rely on nitrile gloves:
Healthcare: In the medical field, nitrile gloves are essential for doctors, nurses, lab technicians, dentists, and other healthcare professionals. They provide a reliable barrier against pathogens, bodily fluids, and harmful chemicals, making them crucial for patient safety and infection control in clinical settings, surgical procedures, and laboratory work.
Foodservice: Nitrile gloves are used extensively in food preparation, handling, and service. Chefs, food prep workers, servers, and catering staff depend on them to maintain hygiene and prevent contamination while preparing and serving food. These gloves are food-safe and help uphold health and safety standards in commercial kitchens, restaurants, and catering services.
Beauty and Personal Care: Professionals in the beauty industry, including hairdressers, estheticians, nail technicians, and tattoo artists, use nitrile gloves to protect both themselves and their clients. They offer protection against chemicals, dyes, and tattoo ink while preventing the spread of bacteria and ensuring cleanliness in salons, spas, and tattoo parlors.
Automotive and Mechanical:Mechanics, auto technicians, and others working in automotive and machinery repair use nitrile gloves for their resistance to oils, grease, solvents, and other harsh chemicals. Nitrile gloves provide excellent grip and dexterity, allowing workers to handle tools and parts effectively while protecting their hands from harmful substances.
Industrial and Manufacturing: In industrial and manufacturing environments, nitrile gloves are essential for protection against chemical exposure, abrasions, and cuts. Factory workers, cleaners, and maintenance staff rely on these gloves to ensure safety when working with machinery, cleaning agents, or hazardous materials.
Durability and Strength
Nitrile gloves are renowned for their durability. They offer better resistance to punctures, tears, and abrasions than latex and vinyl, making them a more reliable choice in demanding environments where hands are exposed to harsh materials.
The company is the world’s best what are nitrile gloves made of supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.
Chemical Resistance
Nitrile gloves are also known for their excellent resistance to chemicals, including oils, acids, and solvents. This makes them ideal for use in industries such as automotive and manufacturing, where contact with hazardous materials is frequent.
Versatility
Nitrile gloves are incredibly versatile. From handling food to managing industrial tasks, these gloves are used across multiple sectors, offering a balance between flexibility, protection, and durability.
Powdered nitrile gloves are designed for easy donning and doffing, but the powder can irritate certain situations, especially in healthcare. Powder-free gloves, the more common option, eliminate this issue and are preferred in food and medical industries where contamination must be minimized.
Nitrile gloves are categorized into medical (exam) and industrial grades. Medical-grade nitrile gloves must meet stringent FDA regulations for use in healthcare and offer excellent puncture and chemical resistance. Industrial-grade gloves are suitable for environments like automotive work and manufacturing, where exposure to harsh chemicals is daily, but sterility is not required.
Nitrile gloves are available in a range of thicknesses, typically measured in mils, where 1 mil equals one-thousandth of an inch. The thickness of nitrile gloves plays a key role in determining their level of protection, flexibility, and the types of tasks they are best suited for. Here’s a detailed look at how different thicknesses affect glove performance across various industries:
3 Mil Gloves – Lightweight for Dexterity: At 3 mils thick, nitrile gloves are thin, offering a high degree of flexibility and tactile sensitivity. These gloves are ideal for tasks that require fine motor skills and precision, such as food preparation, handling small objects, or performing light cleaning tasks. Their lightweight design allows for excellent dexterity, making them a popular choice in the food service industry where workers need to handle utensils and ingredients with ease while maintaining hygiene. However, these gloves provide less resistance to punctures and chemicals compared to thicker options, so they are better suited for tasks with minimal exposure to hazards.
5 Mil Gloves – Balanced Durability and Flexibility: Nitrile gloves with a thickness of 5 mils strike a balance between strength and flexibility. They offer enhanced durability while still allowing for sufficient dexterity, making them versatile for a wide range of applications. These gloves are commonly used in medical environments, such as by doctors, nurses, and lab technicians, because they provide reliable protection against contaminants and bodily fluids without compromising comfort or tactile sensitivity. They are also suitable for tasks that require moderate protection, such as light cleaning, basic maintenance, and tasks where a blend of comfort and durability is important.
8 Mil Gloves – Heavy-Duty Protection: Thicker nitrile gloves, around 8 mils, are designed for heavy-duty tasks that involve exposure to harsh chemicals, sharp objects, or abrasive materials. These gloves offer superior protection against punctures, cuts, and chemical spills, making them a preferred choice in industrial and manufacturing settings where workers handle hazardous materials, solvents, or mechanical parts. While thicker gloves provide more robust protection, they may slightly reduce flexibility and sensitivity, which is a trade-off when performing more intricate tasks. However, they are essential for ensuring safety in high-risk environments like automotive repair, construction, and industrial cleaning.
Textured nitrile gloves offer better grip, making them ideal for tasks that require handling tools or slippery items. Smooth-finished gloves provide a more natural feel but might not offer the same level of grip.
Puncture Resistance
Nitrile gloves are well-known for their puncture resistance, making them ideal for jobs involving sharp objects. Different industries may require varying levels of protection, so it’s essential to choose gloves with the appropriate thickness and grade to match the level of risk.
Here’s a simplified chart showing how nitrile gloves perform against common chemicals:
The FDA certifies medical-grade nitrile gloves that meet specific safety standards. Industrial gloves are often tested to meet various safety standards, like ISO, to ensure they provide adequate protection in different work environments.
Choosing the right glove size is essential for both comfort and protection. Wearing gloves that are too tight can restrict movement and cause discomfort, while gloves that are too loose may reduce dexterity and compromise safety. To find your correct glove size, follow these steps:
Biodegradability of Nitrile Gloves
While traditional nitrile gloves are not biodegradable, Eco Gloves offers biodegradable options that break down more efficiently than standard nitrile gloves. This provides a more sustainable option for businesses seeking to minimize their environmental impact.
Sustainability in Manufacturing
Eco Gloves prioritizes sustainable manufacturing practices by utilizing eco-friendly materials and processes. This ensures that while nitrile gloves provide safety and protection, they do so with minimal environmental harm.
Proper Disposal of Nitrile Gloves
Proper disposal is critical in reducing environmental impact. While nitrile gloves are not typically compostable, Eco Gloves offers compostable alternatives. You can also check local recycling programs for glove recycling options where available.
Myth 1: Nitrile Gloves Are All the Same
Not all nitrile gloves offer the same protection or durability. Thickness, texture, and certification determine a glove’s quality and performance.
Myth 2: Nitrile Gloves Can't Be Recycled
While not all nitrile gloves are recyclable, some specialized programs do exist. Eco Gloves offers eco-friendly options that may be recyclable in certain facilities.
Myth 3: Nitrile Gloves Are Too Expensive
Though nitrile gloves can be more costly upfront, their durability and resistance to chemicals and punctures make them more cost-effective in the long run.
Nitrile gloves typically have a shelf life of 3-5 years when stored in a cool, dry place away from direct sunlight. To ensure longevity, avoid exposing the gloves to extreme heat or cold.
If nitrile gloves have become brittle, discolored, or feel sticky, it’s likely they have degraded and should not be used.
Are Nitrile Gloves Safe for Food Handling?
Yes, nitrile gloves are FDA-approved for food handling.
Can Nitrile Gloves Be Used in Medical Settings?
Yes, medical-grade nitrile gloves are used in healthcare.
Are There Color Differences in Nitrile Gloves?
Nitrile gloves come in various colors, with blue being standard in medical settings.
Contact us to discuss your requirements of white nitrile gloves. Our experienced sales team can help you identify the options that best suit your needs.